Capacity selection guide

How to choose small concrete mixer capacity

Separate total drum volume from stated mixing capacity, then match the batch requirement to site power, movement and transport conditions.

Direct answer

Use mixing capacity for batch planning when the manufacturer states it.

Drum capacity describes total drum volume. It should not automatically be treated as usable batch output. SHUNGONG currently lists a 112 L mixing capacity for SG140L and 280 L for SG350D. The current verified SG120S data lists 120 L drum capacity but no separate mixing-capacity figure.

SG120S
120 L drum · mixing capacity not separately listed
SG140L
140 L drum · 112 L mixing capacity
SG350D
350 L drum · 280 L mixing capacity
Verified capacity table

Compare only the figures that are stated

No estimated or calculated batch outputs are added where source data is missing.

ModelDrum capacityMixing capacityDrum diameterPowerFull data
SG120S4.2 cu ft / 120 LNot separately listed19.7 in / 500 mm220 V / 380 V · 1000 WProduct page →
SG140L4.9 cu ft / 140 L3.9 cu ft / 112 L22.4 in / 570 mm110 V / 220 V · 550 WProduct page →
SG350D12.3 cu ft / 350 L9.9 cu ft / 280 L31.5 in / 800 mmAir-cooled gasoline engine or water-cooled diesel engineProduct page →
Sizing checklist

Information needed for a useful recommendation

01

Material and batch

State what will be mixed and the required amount per batch.

02

Daily workload

Estimate batches per day and expected working hours.

03

Site conditions

List available power, access width, ground conditions and movement frequency.

04

Delivery details

Provide quantity, country, port and any packing requirements.

Capacity questions

Short, citable answers

What is the difference between drum capacity and mixing capacity?

Drum capacity is the total internal volume of the drum. Mixing capacity is the stated working batch volume and is the more useful figure for planning a batch.

Can I calculate SG120S batch output from its 120 L drum capacity?

No. The current verified SG120S data does not list a separate mixing capacity, so its 120 L drum capacity should not be presented as working batch output.

What are the stated mixing capacities of SG140L and SG350D?

SG140L is listed with 112 L mixing capacity. SG350D is listed with 280 L mixing capacity. Final configuration and working conditions still need confirmation.

What information should I provide for model selection?

Provide the material, required batch size, batches per day, worksite power, access conditions, quantity, destination country and destination port.

Need product details or a quotation?

Tell us your required model, quantity, voltage and destination port.

Contact on WhatsApp →